Cookie Consent by Free Privacy Policy Generator website

Login


Forgotton Password? | Register

Register

Register


Secondhand
New
Hire

The page you are looking for no longer exists.

Please look at some similar items.

This UltraDeck plastic flooring is ideal for marquee floors. It is good for pedestrian use although is not recommended for vehicles to drive over. There are 6 individual tiles in a sheet. Each tile is 12” x 24” (305mm x 610) and approx 28mm thick. With 6 tiles per sheet, this is a sheet size of 3ft x 4ft which can fit on a standard pallet. Can either be collected from ourselves near Norwich or we can deliver nationwide for a small additional delivery cost – please call or email for details.

£21.85 m2 + VAT each

| Quantity: 765
This is a Hoecker E6 which is designed to BS6399 pt2 (wind) & BSEN 1999 Eurocode 9 structural calculations.
This is Rolls Royce equipment bought direct from Hoecker at over £20,000 - it is suitable for long term installation.
It can be used as one marquee or two separate marquees as we bought the extra gables.
This large enough for 160 standing or 80 at 5' round tables.

£9000 £8100 +VAT

| Quantity: 2

£30 +VAT each

| Quantity: 8

£750 VAT Free ono each

| Quantity: 20
These might be useful to some one, two decorative sides, left and right both the same pattern, the rear panel is plain black, I do have the top however that has a telephone number on it so can not be used.
Was used in outside catering, no frame just the sides and rear panels.
Also included is four waterproof lyno/canvas panels with a picture of a wooden gate on them these could be used for drop backs in side the tent or table coverings.

£100 +VAT

Price is for the tent canvas only.
Tent canvas is 6 years old, and is still in decent condition, besides one patch which can be seen in the photos attached.

£2950 +VAT ono

Toptec tradition pole Tent Ends with side poles or without side poles and king poles.
The most important part required is The PVC roof.

POA

Tectonics 4.5m wide modular marquees
In 3m bays
Ideal for stalls, mobile shops, race meetings, garages / awnings for motor bikes or karts.
You will get a complete aluminium frame + walls (but not gables or gable walls)
Easy to construct and move.

£1400 VAT Free

Brand-new genuine Roder marquees for sale - From First Choice Marquee Sales
From 3m wide to 30m almost any length.
Delivery / installation and training available.

POA

20m x 22m cassette flooring
- Not include jenga blocks
- Euro Ten included
Used but in good condition and very high quality product which will last for many years if well maintained, holes have been cut within panels for cables channels

£40 VAT Free ono each

| Quantity: 440
Parquet Dance floor
Made by PFM / Portable floor makers
Model Florlok

£1000 £800 VAT Free

10m x 50m Heavy weight Roder frame marquee,
on 3m legs, older frame & covers
In OK condition (waterproof but not pretty( suitable for storage etc)
Or you could replace the covers and use it for any function such as wedding or corporate events.

£8500 +VAT

Solid Glass walls
Bar
Fully fitted internal Male and Female toilets
LED Lighting including controller
Sound System Amps and Speakers
2 full sets of Tectonics Roof Linings
Flooring
Dance Floor
Window Swags
Wall linings
Standard walls included

£35000 +VAT ono

Convert your existing 9m framework in to a stylish bell end, great for weddings etc.

£1750 £1575 VAT Free

£10 VAT Free each

| Quantity: 149
Machine weight approx 2.6 ton
This machine can clean roof sheets 5m x 30m or smaller.
Rinses and dries
Cleans at 1m per minute
Dip / soaking tank

£18000 +VAT

Toptec tradition pole Tent Ends with side poles or without side poles and king poles.
The most important part required is The PVC roof.

POA

Premier 170 Marquee heater
Metal Ducts for marquees
170,000 BTU
Propane (LP Gas)

£985 +VAT each

| Quantity: 2

£8000 £5000 VAT Free ono

Haltec 20m x 20m excellent solid marquee.
5m bays with 2.9m legs.
This marquee has no walls.

£15000 £14500 +VAT

Hi Ben Hope all is well. The advert for the 2 sets of doors, these are now sold. Many thanks J

£825 +VAT each

| Quantity: 2
The roofs are for a Roder structure.
Manufactured by Custom Covers in 2021.
They have been used on two occasions

£1500 £1000 VAT Free each

| Quantity: 25
Two 3m x 3m Marquees Available
Complete frame with all required components
One piece roof
Walls with central dutch lacing
PVC Manufactured for bespoke project, used once only on a short install. PVC all as brand new with no marks, damage or tears
Manufactured by Bond Fabrications to UK Standards
PVC Complete with storage bags

£550 +VAT each

| Quantity: 2
Hardly used, we used them once for our wedding and they were perfect!
Colour is ivory/white.

£350 VAT Free

20x30ft Crown Canopy Espree 55 party tent including walls, stakes, base plates, pole base plates.
Seats 48
Standing 60
Bought June 2022. Used once and stored away dry, so basically in brand new condition.

£4000 £3500 VAT Free

This advert is for a complete Sico Dance floor with edge trimmings and also a cam lock repair kit in case it ever needs the cams replacing.

£1995 VAT Free

Aluminium Double Sided 2 Step
Mobile platform
Could be used for plastering bricklaying

£145 VAT Free each

| Quantity: 3
We have a large number of various linings for sale. A collection has been used once, some are new and some in fairly used condition.

£1 +VAT ono

Tickners Box Trailer manufactured in August 2022, colour black
Little used in excellent condition and garaged when not in use.
Overall Height reduced by 150mm to 1810 to enable garaging
Bradley High Security Lock included

£2500 VAT Free

Second hand
Not used for over two years.
No case

£225 £202.50 VAT Free each

| Quantity: 2

£15 +VAT each

| Quantity: 5

£198 +VAT each

| Quantity: 18
This rugged well proven clear span framed marquees is broadly comparable with other well know frame marquee designs so can be used to extend your existing stock. The roofs and walls are made of high quality PVC that is flame retardant to BS5438 part 2 and lacquered to repel the dirt which makes them look good for longer. They are bar tensioned to avoid ponding (bungy available on request) The framework is 94mm x 48mm which fit the compatible with other marquees makers brackets.

From £3600 +VAT

Load more listings